Honda Civic Gen 10/11 1.5T Flywheel Locking Tool

Installing clutches is a long and arduous process, having the right tools can make the difference between pulling your hair out and breezing through the job. We came up with this simple tool that bolts to the engine block and splines with the starter teeth on the flywheel to keep it locked in place so the flywheel bolts can be torqued to spec without the operator having to hold the crankshaft at the same time.

Made from a high strength plastic, it's plenty strong to hold the flywheel in place while the bolts are torqued to their 91ft/lb spec!

To use it simply slide the blind hole over the dowel pin in the engine block and thread the supplied bolt into the block hand tight after the flywheel bolts have are snug and the flywheel is sitting flush on the crankshaft. The teeth of the tool will mesh with the flywheel, you may need to turn the flywheel a few degrees to get everything to line up properly.

This is included for FREE with our Stage 0 Retrofit Clutch Kit